Dynaudio Esotec - Technical Specifications Soft Dome Tweeter MD 102
| Thiele Small Parameters | ||
| Nominal impedance | Znom | 8 Ω |
| DC resistance | Re | 5.6 Ω |
| Voice coil inductance | Le | -mH |
| Resonance frequency | fs | 1300 Hz |
| Mechanical Q factor | Qms | - |
| Electrical Q factor | Qes | - |
| Total Q factor | Qts | - |
| Mechanical resistance | Rms | -kg/s |
| Moving mass (incl. air load) | Mms | -g |
| Suspension compliance | Cms | -mm/N |
| Effective dome diameter | d | -mm |
| Effective piston area | Sd | 7.7 cm² |
| Equivalent volume | Vas | -l |
| Force factor | Bl | -Tm |
| Recommended frequency range | 2200 - 30000 Hz |
|
| Magnet and Voice Coil Properties | ||
| Voice coil diameter | dc | 28 mm |
| Voice coil height | hc | 1.7 mm |
| Linear excursion, peak to peak | -mm | |
| Max. excursion, peak to peak | -mm | |
| Power Handling | ||
| Nominal long term IEC (Depending on crossover) | 100 W | |
| Transient (10 ms) | 500 W |
|
| Mechanical Properties | ||
| Net weight | 0.126 kg | |
| Overall dimension | ø 62.2 x 43 mm | |
Typical impedance correction for MD 102 |
||
|
DSP Red line: on-axis response Green line: 30º horizontal Blue line: 60º horizontal Measurement conditions: Level: 2.83 V Distance: 1 m Measured in a large baffle |
|
Impedance Red line: impedance, free air Green line: impedance, free air with compensation. Measurement conditions: Level: 3.16 V, 50 ohm Driver in free air |
|
Facts Coated textile dome eliminates any high frequency break-ups Powerful neodymium magnet system Protective grille Open and detailed high frequency reproduction Damped cavity beneath the dome Ferrofluid adds damping and increases power handling Aluminium voice coil wire results in a low moving mass Shallow mounting depth Strong 6.4 mm terminals |
|
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 (0) 4108 - 4180 - 0, Email: info@dynaudio.com
close window